SF-476S Medical Cabinet Temperature Controller with Temperature Sensing Probe Temperature and humidity
(No reviews yet)
Write a Review
- Weight:
- 0.50 KGS
Description
Features
Humidity display /Temperature control /
Defrost control/ Power switch/ Value storing /
Self testing Evap. Fan control/ Light control
Technical Data
Temperature sensor: NTC, one sensor (neither positive nor negative), 2m(L)
Humidity sensor: one sensor, humidity display range:00~99% Accuracy:±03%
Range of temperature display:－45～99℃
Accuracy:±01℃
Range of set temperature:－45～75℃
Factory default : Cooling cabinet:10℃/ Refrigeration cabinet: 03℃
Dimension:181(Length)×41(Width)×47(Depth)mm
Mounting hole dimension:138(Length)×32.5(Width)mm
Relay output contact capacity Compressor: N. O. 10A/250VAC
Light: N. O. 8A/250VAC
Fan: N. O. 5A/250VAC
Cooling cabinet(N1)inner parameters:
| Paramete | Function | Set range | Default |
| PA | Menu password | 00～50～99 | 82 |
| E1 | Lower set point limit |
－45℃～Retain freshness
set temperature
|
10℃ |
| E2 | Higher set point limit |
Retain freshness
set temperature ～75℃
|
14℃ |
| E3 | Refrigeration Hysteresis | 00～20℃ | 04℃ |
| E4 | Heating hysteresis | 01～20℃ | 20℃ |
| E5 | Refrigeration start delay time | 00～10min | 3 min |
| E6 | Heating start delay time | 00～10min | 0 min |
| E7 | Refrigeration and heating switch time | 00～90min | 15 min |
| E8 | Offset on room sensor | －20～20℃ | －03℃ |
| E9 | Offset on humidity sensor | －20～20% | －10% |
| P1 | Light duration time |
00～180min
00 is infinite length
|
00 min |
| C1 | High temp. alarm value | C2～75℃ | 45℃ |
| C2 | Low temp. alarm value | －45℃～C1 | -35℃ |
| C3 | Alarm delay time | 00～60 min | 0 min |
| C4 | Alarm hysteresis | 01～10℃ | 01℃ |
| F1 | Defrost duration | 01～90 min | 30 min |
| F2 | Defrost interval | 00～24hr | 1hr |
| F4 | Display when defrost |
00＝normal display
01＝lock display
|
01 |
| H1 | Fan control |
H1=01synchronized with heater and comp., off when defrost
H1=02synchronized with heater and comp., open when defrost
H1=03 keep running, open when defrost
H1=04 keep running, close when defrost
|
03 |
| A1 | Lowest humidity display | 00～99% | 35% |
| A2 | Higher humidity display | 01～99% | 75% |
| A3 | Set humidity | 10～85% | 60% |
| A4 | Humidify hysteresis | 01～30% | 10% |
| A5 | Dehumidify hysteresis | 05～30% | 10% |
| A6 | Humidify dehumidify switch time | 01～90min | 10 min |
| B1 | Dehumidify temp. hysteresis | 00～10℃ | 00℃ |
| B2 | Dehumidify duration | 01～20 min | 03 min |
| T1 | Force dehumidify interval | 01～90 min | 10 min |
| T2 | Force dehumidify duration | 01～60 min | 2 min |
| CPA | Change menu password |
00～99(if set to 00, means
cancel the password)
|
82 |
| AT1 | Record shortest interval | 01～3 0min | 05 min |
| BR1 | Highest alarm humidity | 01～99% | 75% |
| BR2 | Lowest alarm humidity | 01～99% | 35% |
| BR3 | Humidity alarm delay | 00～120 min | 1 min |
Refrigeration cabinet(N2)inner parameters:
| Paramete | Function | Set range | Default |
| PA | Menu password | 00～50～99 | 82 |
| E1 | Lower set point limit |
－45℃～Retain freshness
set temperature
|
03℃ |
| E2 | Higher set point limit |
Retain freshness
set temperature ～75℃
|
05℃ |
| E3 | Refrigeration Hysteresis | 00～20℃ | 04℃ |
| E4 | Heating hysteresis | 01～20℃ | 20℃ |
| E5 | Refrigeration start delay time | 00～10min | 3 min |
| E6 | Heating start delay time | 00～10min | 0 min |
| E7 | Refrigeration and heating switch time | 00～90min | 15 min |
| E8 | Offset on room sensor | －20～20℃ | －03℃ |
| E9 | Offset on humidity sensor | －20～20% | －10% |
| P1 | Light duration time |
00～180min
00 is infinite length
|
00 min |
| C1 | High temp. alarm value | C2～75℃ | 45℃ |
| C2 | Low temp. alarm value | －45℃～C1 | -35℃ |
| C3 | Alarm delay time | 00～60 min | 0分钟 |
| C4 | Alarm hysteresis | 01～10℃ | 01℃ |
| F1 | Defrost duration | 01～90 min | 30 min |
| F2 | Defrost interval | 00～24hr | 1hr |
| F4 | Display when defrost |
00＝normal display
01＝lock display
|
01 |
| H1 | Fan control |
H1=01synchronized with heater and comp., off when defrost
H1=02synchronized with heater and comp., open when defrost
H1=03 keep running, open when defrost
H1=04 keep running, close when defrost
|
03 |
| A1 | Lowest humidity display | 00～99% | 35% |
| A2 | Higher humidity display | 01～99% | 75% |
| A3 | Set humidity | 10～85% | 60% |
| A4 | Humidify hysteresis | 01～30% | 10% |
| A5 | Dehumidify hysteresis | 05～30% | 10% |
| A6 | Humidify dehumidify switch time | 01～90min | 10 min |
| B1 | Dehumidify temp. hysteresis | 00～10℃ | 00℃ |
| B2 | Dehumidify duration | 01～20 min | 03 min |
| T1 | Force dehumidify interval | 01～90 min | 10 min |
| T2 | Force dehumidify duration | 01～60 min | 2 min |
| CPA | Change menu password |
00～99(if set to 00, means
cancel the password)
|
82 |
| AT1 | Record shortest interval | 01～3 0min | 05 min |
| BR1 | Highest alarm humidity | 01～99% | 75% |
| BR2 | Lowest alarm humidity | 01～99% | 35% |
| BR3 | Humidity alarm delay | 00～120 min | 1 min |
Related Products
SF-599 refrigerator temperature controller temperature controller
US $55.00
Features
Refrigeration control
Hot gas、heating defrost function
Sf-100d temperature controller digital temperature controller electronic temperature controller temperature incubator temperature controller single display
US $22.00
Power supply: 120VAC/230VAC 50/60HzTemperature display Technical Data Range:-50.0～150.0℃Accuracy:±1.0℃Temperature sensor: NTC, 2m(L)Dimension:77(Length)×35(Width)×60(Depth)mmMounting...
SF-150 Cabinet electronic temperature controller manual adjustment sf-150 freezer temperature controller temperature control
US $30.00
Patented product, smart encoderadjustment, can adjust temperaturecontrol range at random.Easily operation, convenient and functional.Temperature control, value storing, Power switch Technical...
Sf-212s electronic temperature controller sf-121s temperature controller
US $45.00
Temperature controlLight controlmanual/automatic defrost by turning offTime/temp. seting to end defrostRe-start delayRelay output :1HP（compressor） Technical Data Range of temperature...
