Home Automation

Scope of application: 220V household electric power, electric appliances with power less than 3000 watts can control its power supply and power failure, such as: water pump, mud pump, motor, lamp, fan, fan, insecticide, spray machine, car washing...

Product parametersThe input voltage: DC9-15 v (more than 15 v might damage the module)The static power consumption: 0.2 WThe maximum output current: 2.4 A (two motor total current must be less than 2.4 A)The drive motor: 2A DC motor5V voltage output...

● the relay outputs two groups of positive and negative reversible voltages, and the maximum output current is 2A. ● the DC motor drive chip outputs two sets of positive and negative reversible voltages, with a maximum output current of 1A. ● two sets...

Circuit board default Pelco-D agreement of up, down, left, right, change times +, times - 1-6 road relay control points.Press the button corresponding control relay contract which the state of the indicator light absorption, loosen the corresponding...

Two groups of independent H bridge, each set maximum rated current is 2.8 A Voltage: DC 9-24V RS485 communication and switch control can be set up Support potentiometer control, switch control motor and reversing Baud rate,...

Main technical index:1 working voltage: 12V (23A battery)2 working current: less than 15mA3 working frequency: 315MHz, 433MHz (optional)4 transmit power: 12mW5 frequency deviation: less than 75KHz6 external dimensions: 127*49.8*17mmPerformance...

Remote control distance: 5-10 meters (open without interference, depending on the specific environment)Size: 86*86*10 (mm)Net weight: 60gWorking frequency: 315MHz/433mhzCoding format: 1527 chipShock resistance: 270KBattery type: 12V/27AOptional keys: 1...

1, working frequency: 315MHZ/433MHZ2, working voltage: DC12V3, static current: less than 10mA4, remote control distance: 20~100 meters or more (this is equipped with different remote control in the open area of the actual remote control)5, contact...

1, working frequency: 315MHZ/433MHZ2, working voltage: DC12V3, static current: less than 10mA4, remote control distance: 20~100 meters or more (this is equipped with different remote control in the open area of the actual remote control)5, contact...

1, the key code: for the remote control of the learning and deletion;2, switch door key: used to control the motor running state;3, LEP lamp: used to indicate the state of alarm;4, a pair of lights: used to indicate the state of the code or code5, open...

DRC-3A 433/868MHZ is a kind of remote control receiving switch and transmitter, which is suitable to be used as a remote control device of the door machine control panel. Using 12V or 24V AC/DCWhen the output voltage signal is used as a power supply, the...

Product Description:The wireless keypad is a dual transmitter that activates an open cycle of your gates once correct combination is entered. Can be installed on a wall either indoor or an outdoor location. It has an IP54 rating. The estimated...