30A Digital Temperature Controller MC-1

Dimension:190(Length) 70(Width) 60(Depth)mm
Mounting hole dimension:171(Length) 58(Width)mm

Front Panel Operation
1 . Set temperature (compressor adjustment temperature) adjustment
Press button, the set temperature is displayed.
P o modify and store the displayed value , Press button to exit the
and display the cold room temperature.
If no more button is pressed within 10 seconds, the cold room temperature will be displayed.
(Set temperature adjustment range: parameter E1 E2)
2. Refrigeration indicator: During refrigeration, the indicator is on.
3. Constant temperature indicator: When the cold room temp. is constant, or during the delay start,
the indicator is on.
4. Parameter setup
Press button and hold for 6 seconds to enter the parameter setup mode while E3 flashes.
Press again button to select sequentially from the parameters : E1,E2,E3,E4,E5.
Press or button, the value of parameter will be displayed and can be modified and stored.
If no more button is pressed within 10 seconds, the cold room temperature will be displayed.
ress or button t adjustment
~
Features of Function
Integrated intelligent control and applicable to the compressor of one H.P.
Temperature Display/ Temperature Control/ Value Storing / Self Testing
Specifications
1. Power supply:230V AC 50/60Hz;
2. Temperature sensor:NTC ,one sensor ,2m(L)
3. Range of temperature displayed: 45 ~99 ; Accuracy: 1
4. Range of set temperature: 40 ~30 ; Factory default :0
5. Temperature of the operating environment: 10 ~60
Relative Humidity:20%~90%(Non-condensing)
6. Output contact capacity:
Compressor: N.O. 30A/250V AC(applicable to 1 H.P. Compressor,if more connected to AC contactor)