134.2K ISO11784 RS485 Mobus RFID Reading Module Item Management Industrial Automation Animal

WL-5400 Low Frequency Remote Card Reading Module Specification
The WL-5400 module is a highly integrated industrial grade long-distance low-frequency RFID card reading module that supports reading cards such as EM4305, Hitag, TK4100, EM4100, EM1001, etc. It can read 134.2KFDX-B format tags and 125K EMID format tags that comply with the IS011784/85 protocol. The module communicates with the outside world through the UART port, and users only need to provide power to achieve card reading operations by simply sending serial port commands without understanding complex RF decoding protocols.
The module is compact in size, stable in performance, easy to use, highly reliable, and can be easily integrated into users' systems. The module comes with a card reading indicator light, which has high sensitivity, low power consumption, long distance, fast speed, no blind spots, and no missed card reading. It also has multi-level automatic tuning function, which can automatically adjust the resonance parameters of the antenna according to environmental and temperature changes, always maintaining the best card reading state. Even in harsh environments around the antenna, it has good card reading performance.
Application scenarios: pet feeders, litter boxes, water feeders, poultry ankle loop readers, animal ear tag readers, fish patrol markers, pigeon racing timing, handheld card readers, sports speed recorders, item management, industrial automation, AGV vehicles, and more.
1: Product specifications
Model WL-5400 V2.3 Size 43.8 * 35 * 6mm Frequency 134.2K
Support protocol FDX-B EMID power supply voltage 3.3~6V
The working current is approximately 50-200mA depending on the power supply voltage, antenna size, and reading distance. Working temperature -40~+85 ℃
Antenna inductance 92~102uH automatic tuning
Card reading speed of 30mS, tag movement speed of 3m/s
The card reading distance is adjustable from 0 to 50CM depending on the antenna, tag, and usage environment. 2: Pin definition
The data interface adopts a 6PINZH1.5 pin holder and has spare 6PIN solder pads.
VCC 3.3-6V power supply, requires pure power supply. When using a switch power supply, it should be connected to AC ground.
GND power supply ground
When the ON/OFF is high, the module is turned on, and when the low is low, it is turned off. Automatically tune upon startup.
TX serial TTL 3.3V level data output
RX serial TTL 3.3V level data input
LED card status indicator interface, low level valid, can be connected to 10 external microcontrollers.
The antenna interface adopts 2PINZH1.5 pin holder and has spare 2PIN solder pads.
ANT antenna interface
ANT antenna interface
3: Reference table for card reading distance (antenna can be customized when powered by 5V battery)
Antenna size
Tag size diameter 65mm circular antenna diameter 130mm circular antenna 24x38CM rectangular antenna
2x12mm injection label 12CM 20CM 25CM
4x22mm injection label 16CM 28CM 34CM
25mm diameter coin card 16CM, 26CM, 36CM
30mm standard animal ear tag 24CM 38CM 50CM
Note: When using a linear power supply or high-quality switching power supply and connecting it to AC ground, the distance between the card reading and the battery is close.