wireless password access control keypad wireless keyboard with controller

A . Safety instructions

Thank you very much for purchasing this product , in order to properly use this product , please read carefully before using this manual .

B. Product Applications

1 using wireless transmitter and wireless receiver manner paired achieve passwords out of access management capabilities .
2 points acting based wireless radio control and maintain control of the two products , a variety of convenient functions supporting the use of gated .
3 no wiring, can be directly pasted ( or screw fixing ) in a variety of wall , such as: glass, marble , etc. , is very convenient on-site installation , easy to enter the password access management .
4 can be used to control automatic door lock and a variety of floor spring power electric rolling gates, etc.

Three products are the overall structure

Note : The device wakes up the red light , according to the correct password , decrypt the green light , effective radiated blue lights .

Four . Overall product qualities

1 microcomputer systems , passwords safe and reliable ;

2 firing distance and stable , using the DIP switch on the code , user-friendly automatic matching set .

3 special power-saving mode using sleep wake , usually almost no power capacity, long battery life ( nearly a year ) .
4 password settings. Changing operation is very convenient , the ad hoc system initialization function , in order to forget the password for the system update , restore the factory settings .

V. Operation

1 DIP transceiver pair :
Open the rear cover plate of the wireless password DIP switch ( 4 ) and the wireless receiver DIP switch ( after 4 ) paired DIP , pulling into the same.

2 normal operating procedures ( inching type ) :
Press \"FUC\" - Enter the 6 user password out ( factory default 123456 ) Press \"FUC\" confirm - Jog automatically send wireless signals . Green light during the 15S within each press \"FUC\"
Key to open the door can issue jog wireless signal . Unmanned 15S button , the device automatically exit , go back to sleep .

3 normal procedure ( hold type ) :
Press \"FUC\" - Enter the 6 user password ( factory default 123456 ) - press \"FUC\" confirm - the green light during the 15S , the press \"OPEN\" button to automatically send the unlock signal ,
Press the \"LOCK\" button to lock automatically send signals 15S unmanned button , the device automatically exit , go back to sleep .

4 Change Password :
Press and hold the \"FUC\" keeping 3S above - to hear a long tone buzzer - Enter the password for the original six press \"FUC\" Confirm - Enter the new six first password, press \"FUC\" confirm
Enter the new six second password, press \"FUC\" confirm - heard a sound - password changed successfully .

5 restore the factory settings :
If you forget your user password, you must initialize the operating system , restore the factory settings Open the back cover - Stubbs reset switch to \"RESET\" position - 30S can hear the buzzer
One long beep , the system initialization is complete Stubbs reset switch back to \"NORMAL\" position
- Restore the system to the factory default password 123456 .

6 hand exit :
To save battery life , when the wireless password to decrypt disc into the launch state, the door unlock operation is completed , press and hold any number key 2S more, the system can be forcibly
Exit , go back to sleep , to maximize conserve battery power.
VI. Dimensions:

113 ( length ) × 63 ( W ) × 20 ( height ) (mm) ( wireless password plate )
123 (L ) × 50 ( W ) × 32 ( height ) (mm) ( Receiver )

Seven Technical Parameters

Power supply: two 12V 23A battery
Standby current: Sleep mode , \u003c6μA
Operating current : 23mA
Password digits: 6
Wake-up mode : Press the function key FUC
Battery life : ≥ 320 night ( operated at 100 times a day or less )
Transmitting distance : ≥ 5m conventional
Way the code : DIP DIP switch on the code
Wireless transmission frequency : 315MHZ