Long Range AGV 134.2kHz ISO11784/85 FDX-B Long Distance Animal Tag Reader Moulde UART 3.3V 5V With 240x380mm Antenna

(No reviews yet) Write a Review

SKU:
UPC:
MPN:
Weight:: 0.20 KGS

On Sale

Now: Eur€ 57.53

Was: Eur€ 76.70

Current Stock:

Quantity:

Description

Description

Notice: Not support HDX
Frequency: 134.2 kHz
Support agreement: ISO11784/5
Protocol: ISO11784/ISO11785 FDX-B/EMID (full-duplex communication)
Read the card chip: EM4305,EM4100 TK4100 And compatible chips
Read rate: 2m/S - 3 m/S
Working voltage: 5V
Communication interface:UART
Baud rate: 9600bps
Size: 43.43 mm*34.65 mm*2 mm
Working temperature: - 40 ° ~ + 85 °
Environmental humidity: 5% ~ 95%
Antenna inductance:100uH
Reader speed:30mS
Working current<200mA(5V)

Pin definition

1 VCC	3.3 ~ 5.5V
2 GND	GND
3 CK	Reserved
4 CD	Reserved
5 PWER	“High-level” module work status, “low level” module sleep status
6 TX	Serial TTL 3.3V level data output
7 RX	Serial TTL 3.3V level data input
8 IRQ	Interrupt output,Read the card output 50mS high level
9 LED	Reading status LED pin, output low level with card
A1	Connect the antenna
A2	Connect the antenna

Reading distance reference table (3*AA battery power supply)

The following distances are for reference only.

Antenna Size RFID Tag/Card Size	Diameter 65mm round antenna	Diameter 130mm round antenna	240x380mm antenna
2x12mm injection label	12CM	20CM	25CM
4x22mm glass tube label	16CM	28CM	34CM
25 mm diameter coin card	16CM	26CM	36CM
Diameter 30mm standard ear tag	24CM	38CM	50CM