card integrated lock Remote electric lock Double-sided card and unlock double-head lock

(No reviews yet) Write a Review
Weight:
2.00 KGS
GB£41.50

Description

Product Description

aeProduct.getSubject()

aeProduct.getSubject()aeProduct.getSubject()Features:
1. Two kinds of method to open the door: electronic control and manually open, automatically locked after closing the door
2. The lock bolt length> 20mm, in line with GA / T73-94 5.1 6B  standards
3. can be used compatible with building intercom, access control, video intercom and other systems
4. Set prompts of openning timeout , with anti - pry alarm, the alarm of does not closing the door on time
5. automatically locked after closing the door, openning door the bolt automatically shrink no collision no noise
6. Support 1000 user cards (IC / ID) with access control  unlock function
7. Can set up a super management card, convenient and simple. Double encryption without wire Remote Keyboard Settings
8. Support remote unlock function (optional) and extracellular signal unlock (intercom system)
9. If artificially turn out the bolt after openning the door, the bolt can automatically retract, the door normally locked
10. suitable for a variety of door , left door, right door, inside-open door and outside-open door, etc.
11. Unlock mistakenly or no entry after unlocked, the door automatically locked in 9 seconds
12. Power supply: DC12V + 0.5V, unlock current <500mA, power 2W, unlock time≤1S
13. Long service life (more than 500000 times), on / off sensitive, low power consumption. Immunity IEC801-5 standard, anti-surge IEC801-5 standard
 
 
Electrical properties:
Input voltage: DC 12V+20%
Quiescent current <80mA
Action current <350mA
Radio frequency card unlock reaction time <0.5S
Remote control unlock reaction time <0.3S
Remote distance>100m
Open current <280mA
Alarm output current <1500mA
Alarm preparation rate: ≥99.9%
Working environment temperature: -40°-70°
Humidity: 95%
Immunity: IEC801-5 standard
Surge resistance: IEC801-5 standard
aeProduct.getSubject()
 
aeProduct.getSubject() aeProduct.getSubject()
View AllClose