9-24v ID 125Khz IC 13.56mhz Embedded Access Control Board with wg26 interface

(No reviews yet) Write a Review

Eur€ 11.51

Current Stock:

Quantity:

Description

ID Module is 125khz; IC Module is 13.56mhz

1: Electrical parameters:

Operating Voltage

Operating Voltage	DC 9-24V
Working current	60mA ~ 80mA
Reading distance	5 to 15 cm
Operating temperature	-40 ° ~ 60 °
User capacity	2000PCS
Support card type	EM4100 card or compatible cards(ID module) S50 card or compatible cards(IC module)

Reader interface: Wg26_in(max distance 100m)

Operating instructions

Add Admin card:

short-circuit S2 to the 0 end when power off, re-power up, red/green LED alternately flashing, continuous two card,

green light flashing means success, The first card is "add management card", second card is "delete management card".

Add user card:

In the working state, swip the "add management card", green LED flashing, swip user card, and then swip "add

management card" end of the adding card operation.

Delete user card:

In the working state, swip "delete management card", red LED flashing, swip the user card you need to delete, and then

swip "delete management card" to end the operation

Delete all cards:

In the working state, swip "delete management card", red LED flashing, and then swip "add management card", wait for 5S

green LED recovery, successfully

View AllClose