4 Port PCI Express Gigabit Network Card Ethernet Adapter 10/100/1000M for Server

4 Port PCI Express Gigabit Network Card Ethernet Adapter 10/100/1000M for Server

About Description:

100% Brand New And High quality.

RTL8111 Chipset (IO-PCE8111-4GLAN)

Specifications

• Standard Compliant

-PCI express base SPEC 2.0 and backward compatible with SEPC 1.1 & 1.0a

-PCI Power management SPEC 1.2

• Supports 10/100/1000Mbps data rate auto negotiation operation

• Supports PCI Express 1.1

• Supports pair swap/polarity/skew correction

• Crossover Detection & Auto-Correction

• Wake-on-LAN and remote wake-up support

• Microsoft NDIS5, NDIS6 Checksum Offload (IPv4, IPv6, TCP, UDP) and Segmentation

Task-offload (Large send v1 and Large send v2) support

• Supports EMAC-393 ECMA ProxZzzy Standard for sleeping hosts

• Supports Full Duplex flow control (IEEE 802.3x)

• Supports jumbo frame to 9K bytes

• Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab

• Supports IEEE 802.1P Layer 2 Priority Encoding

• Supports IEEE 802.1Q VLAN tagging

• Supports IEEE 802.3az-2010 (EEE)

• Supports power down/link down power saving/PHY disable mode Built-in switching

regulator

• Supports PCI MSI (Message Signaled Interrupt) and MSI-X

• Supports quad core Receive-Side Scaling (RSS)

• Supports Protocol Offload (ARP & NS)

• Supports Four 1-Lane 2.5Gbps PCI Express Bus

• Supports hardware ECC (Error Correction Code) function

• Supports hardware CRC (Cyclic Redundancy Check) function

System Requirement:

• Windows 20000, ME, 98SE, Windows Server 2003/XP/Visit/ 2008/7 /8 32-/64-bit,Linux,

MAC OS 10.4 or above and DOS.

You'll receive:

1 x PCI-Express Four Gigabit Ethernet controller card

1 x Low Bracket

1 x User Manual

1 x Driver CD

• Please check pictures for more details.