134.2Khz FDX-B Long Distance Reader ISO11784/85 FDXB EM ID Card 125Khz Rfid Reader Animal Tag Reader

TAD-134A RFID User Manual

1: the product specifications

2: the pin definition

3: The LED signal

Reader will start the automatic tuning when power on, the blue light is lit up, the led will go out when Tuning completion.

After the success of the reading card, blue lights flashing. At the same time, the data sent by RS232 serial port or RS485.

4: data format

Serial port baud rate, 9600, 8 N1, RS232 level; When the card into card read area, the reader will output card number twice, When send the command  $R#  can be read the card repeatedly, send the command  $S# output card number repeatedly.

Check value calculation: XOR 16Bit HEX from the start of “F” to the end of the card number.

 Example:

Card number:90000260009693

The module output:  $F9000026000969327C#

“$” Is the data first, ”F”means FDX-B tag

900002600096932 is the card number,7C For Check value; # is Data tail.

Check value calculation method:

46^39^30^30^30^30^32^36^30^30^30^39^36^39^33^32 = 0X7C

Note:EMID is 10bit data encoding format(In front of the national code and fill 00),FDX-B is 15bit data encoding format.

EMID Card printing 0002327100,The reader output data $E01700000232710076 #

FDX - B Tag printing 900002600096965 , The reader output data $F9000026000969657E #