10-100M-4-Ports-PoE-Extender-Up-to-For-Network-AP-IP-Camera-Telephone-Equipment

Item Description

• Comply with IEEE 802.3af Power over Ethernet
• 10/100M Supported
• Extend the range of PoE an additional 120 meters
• Automatically detects and protects PoE equipments from being damaged by incorrect installation
• Plug- and Play no configuration required
• 4 ports PoE extender can forward both Ethernet and PoE power for 4 terminal equipments via Cat5 UTP cables

Applicable Range:

• PoE input: 1 RJ45 port
• PoE output: 4 RJ45 ports
• Network Medium: Cat5 or better UTP cables (less than 120m)
• Repeater Mode: Store and forward
• MAC Address Table: 2K
• Packet Buffer Memory: 48 Byte
• Switching Capacity: 400Mbps
• PoE Standard: IEEE 802.3at(power-in) / IEEE802.3af(power-out)
• Input power: 25.5 Watts
• Output power: 24 Watts in total
• Power Supply Type: 1/2+,3/6-,Mode A,End-Span
• Network Protocol: IEEE 802.3i-10BASE-T, IEEE 802.3u: 100BASE-TX, IEEE 802.3x-Flow Control, IEEE 802.3af-Power over Ethernet;
• Regulation Compliance: FCC Part 15B, ROHS Directive 2011/65/EU,Low Voltage Directive 2014/35/EU,EMC Directive 2004/108/EC;
• Working Temperature: 0°C~40°C
• Working Humidity: 10%~90%,No Condensation
• Storage Temperature: -30°C~70°C
• Storage Humidity: 5%~90%, No Condensation;
• Dimension: 105x93x28.5mm / 4.133'' x 3.66'' x 1.12''
• Weight: 210g

Note:

• Please don't place any heavy thing on the PoE extender;
• To prevent the water seeping into the extender,please keep PoE extender away wet environment;
• Suggest to use PoE extender indoors.When installing the extender in outdoor,please install it in a waterproof place.

• 1 x 4-Ports PoE Extender