Universal DC 12V 1CH 10A Wireless Remote Control Switch 433MHz Transmitter With Receiver Home Automation

Features:
Wireless Remote Control Switch DC12V 10A 433MHz Transmitter with Receiver
With three output working modes for choosing
Safe and flexible for operation and install
Widely use in house, mall, electromobile, cars, motorcycle anti-theft alarm system or other control systems
Specified as preferred components in remote control garage, roller curtain, door locks, remote sensing, telemetry, industrial control and wireless security alarm industry

Specifications:
Operating voltage: DC 12V
Operating Current: 10mA
Operating frequency: 433MHz
Total load power: 300W
Remote control distance: 100M
Working temperature: -15-75 (℃)
Scope: electronic lock remote control, access control switch, circuit modification, such as small motors
Code: Learning code. (Jog/ Non-Locked, Inter-lock/ locked, Auto-lock / Auto-Locked)

Output working way:
Jog /Non-locked: Press a button is working/ on and loosen your finger on the same button is stop/ off. (A channel change needs a remote control button)
Auto-lock: Press one button for one time is working/ on and press the same button is stop/ off. (A channel change needs a remote control button)
Inter-lock / locked: Press a button is working/ on and press another button is stop/ off. (A channel change needs 2 remote control buttons)

Remote control supporting the corresponding steps: clear --- select the work --- learn the remote control --- matching successful
1. Remove/clean method: Press the learning button about 8 seconds, the indicator will be from being off to on all the time, it means the information that you keep have been removed successfully.
2. Working mode selection: This switch work mode switch
Use a jumper cap to change.
Jog /Non-locked:Not to insert the jumper cap;
Auto-lock: inserted in the middle of T;
Inter-lock / locked: inserted in the L and interlocked.
3. Learning method: Press the learning code for 3 seconds. The indicator will be off, and then loosen your finger, press any button of the remote control to transmit signal, the indicator flash 3 times and then normally on which means you learn it successfully.

Package Included:
1 x Receiver (with BOX)
1 x Transmitter (include battery)

Note:
- Please allow 1-2mm differs due to manual measurement.
- Due to the different display and different light, the picture may not reflect the actual color of the item. Thank for your understanding.