Wiegand Converter

Power: 9-15VCurrent: 30mASize:65*40*10mm    wg_in  wg_out  remark  1 WG34 WG26 Discard more than 8 bits of data  2 WG26 WG34  High 8 bits plus...

Multi-way Wigan adapter board basic functions:Power supply: + 9 ~ 24V, 30mA;Support WG26 ~ WG80 by default (including WG26 / 32/34/35/36/37/40/42/44/66/80 and keyboard code input);Swipe interval of each card reader> 150ms;Both WG signals are output by...

    Due to the limitation of the Wiegand signal, the transmission distance is about 20-80 meters. This product converts the Wiegand signal to R485 and then restores the signal to the Wiegand signal at the controller end, item can...

It provides a variety of firmware, supports virtual serial port, HID-USB interface, HEX, Decimal. 1 Wiegand input to USB (analog keyboard, KEYBOARD) output. 2The maximum number of digits input by WG (Wiegand) is 255. 3The input acquisition speed of WG...

For extended use, please buy two.   1. This product is a Wigan signal extender. It is recommended to use it in pairs 2. Each module will automatically realize the conversion between WG and 485 3. The maximum Wigan number is 80 bits Measured...

  The virtual keyboard device uses USB-HID protocol, does not need to install driver, can use the device like the keyboard, but can only receive data to display in the any text/excel area.   Virtual serial port type device, need to install...

Product Description RS232/wiegand bidirectional converter HDC09 converter support bidirectional conversion between Wiegand and signal RS232 signals, The device can achieve the wiegand go to RS232 and RS232 go to Wigan.The conversion...

Product Description Wiegand wg26 / 34 Go To RS485 Converter Bidirectional transmission Wigan / Wigan to 485 converter , Wigan / Wigan 26, 34 automatic identification , Wigan / Wigan 485 two-way automatic conversion, no need to set . Converter...

The virtual keyboard uses hid-usb protocol without driver. Can only receive data, can not send data. The virtual Serial Port used USB Virtual serial port, the driver needs to be installed, but the data can be sent and received...

RS232/wiegand bidirectional converter HDC09 converter support bidirectional conversion between Wiegand and signal RS232 signals, The device can achieve the wiegand go to RS232 and RS232 go to Wigan.The conversion process of automatic identification...

Embedded Wiegand module, small and easy to embed other devices As a Wiegand protocol input or output interface, Default support WG26 / 34, TTL interface hexadecimal (HEX) bidirectional input and output, Communication parameters: 9600/115200, n,...

Wiegand wg26 / 34 Go To RS485 Converter Bidirectional transmission Wigan / Wigan to 485 converter , Wigan / Wigan 26, 34 automatic identification , Wigan / Wigan 485 two-way automatic conversion, no need to set . Converter with high interference MCU...