PCI to 4 Port RS232 Serial Card DB9 COM Adapter MCS9865 Chipset w/ Fan-Out Cable

4 Ports RS232 Serial Adapter PCI Expansion Card MCS9865 Chipset w/ Fan-Out Cable  

About Description:

100% Brand New And High quality.

MCS9865 Chipset for MosChip(FG-PMIO-V4T-0004V)

Specifications

 INTRODUCTION  

This PCI multi-I/O card uses the latest PCI based Peripheral controller chipset from MosChip, enabling this card to be installed on any PCI capable PC system. Most of the latest motherboards no longer come with serial or parallel port. By using this card, end user can add serial and parallel ports to their PC system, allowing them to connect their serial and parallel devices. The product offers superior performance and unmatched data transfer rates. It is also ideal for industrial automation applications.

FEATURES AND SPECIFICATION

General

• Easy installation, automatically selects IRQ and I/O address
• Fully compliant with PCI Local Bus Specification Revision 2.3
• Supports PCI power management
• Supports PCI IRQ sharing feature, saves valuable resources for other add-on cards
• Supports multiple cards on one PC
• Supports Windows 2000, XP 32-/64-bit, Server 2003, Vista 32-/64-bit, or above, Linux kernel 2.6.14 or above, and DOS 6.22

Serial Port (RS-232) Interface

• Compatible with industrial standard 16C550 UART
• On-chip 256-byte depth FIFO in Transmit & Receive paths of each port
• Fast data rate up to 115.2K bits/sec on each port
• Supports hardware and software flow control
• Supports 5-, 6-, 7-, 8-, 9- bit serial format
• Supports Even, Odd, None, Space & Mark parity
• Supports 1 or 2 Stop bit operation
• Optional jumper for setting RI, +5V, or +12V on pin9 of each serial port DB9 connector (Special models)

Parallel Port Interface

• IEEE1284 compatible parallel port
• Supports SPP, PS2, EPP and ECP mode
• Fast data rate up to 1.5M Bytes/sec
• On-chip 256-byte FIFO

HARDWARE INSTALLATION

1.    For special models with optional jumper for setting the serial ports, configure the jumper block to select the function of the pin9 of each DB9 serial port connector to meet your requirement. Refer to Figure 1 for details.

2.    Turn off your computer and all devices connected to it.

3.    Remove the computer's cover. Refer to your computer user's manual for more details.

4.    Locate an un-used PCI slot and remove the metal bracket. Save the bracket screw for later use.

5.    Align the card horizontally with respect to the PCI slot and insert it into the slot firmly and evenly. Take care not to force it into the slot. Once you have properly positioned the card into the slot, secure the card with the bracket screw you have saved.

6.    Replace the computer's cover.

7.    Turn your computer on. You are now ready to install the driver!  

You'll receive:

1 x 4 Ports RS232 Serial PCI Controller Card 

1 x Fan-Out Cable
1 x User Manual 
1 x Driver CD 

• Please check pictures for more details.