Description
Model
Specification |
35-5 |
35-12 |
35-15 |
35-24 |
DC Output voltage |
5V |
12V |
15V |
24V |
Output voltage range(Note:2) |
±2% |
±1% |
±1% |
±1% |
Rated output current |
7A |
3A |
2.4A |
1.5A |
Output current range |
0~7A |
0~3A |
0~2.4A |
0~1.5A |
Wave and noise(Note:3) |
100mVp-p |
75mVp-p |
75mVp-p |
50mVp-p |
Inlet stability(Note:4) |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
Load stability(Note:5) |
±1% |
±0.5% |
±0.5% |
±0.5% |
DC output power |
35W |
36W |
36W |
36W |
Efficiency |
70% |
76% |
78% |
78% |
Adjustable range for DC voltage |
+10,-5% |
±10% |
±10% |
±10% |
AC input voltage range |
85~132VAC/170~264VAC selected by switch 47~63Hz,240~370VDC |
|||
Input current |
0.8A/115V 0.45A/230V |
|||
AC Inrush current |
Cold-start current 18A/115V 36A/230V |
|||
Leakage current |
<0.5mA/240VAC |
|||
Overload protection |
105%-150% Type: pulsing hiccup shutdown Reset: auto recovery |
|||
Temperature coefficient |
±0.03%(0~50degree Celsius) |
|||
Setup, rise, hold up time |
200ms, 100ms, 30ms |
|||
Vibration |
10~500Hz, 2G 10min,/1 cycle. Period for 60min,Each axes |
|||
Withstand voltage |
I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
|||
Isolation resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
|||
Working temperature and humidity |
-10~+60 degree Celsius(Refer to output load derating curve),20%~90%RH |
|||
Store temperature and humidity |
-20~+85degree Celsius,10%~95%RH |
|||
Overall dimension |
85X58X34mm (L*W*H) |
|||
Weight |
0.38kgS |
|||
Safety standards |
Meet UL 1012 requirement(Not apply for the mark) |
|||
EMC standards |
Meet FCC PART15 J Conduction class B |
|||
Note |
1. The parameter under the testing condition : 230vAC input ,rated load,25degree Celsius70% RH. Temperature. 2. Tolerance the setting tolerance, circuit stability and load stability.(Note:5). 3. Wave test: adopting "A12"double wire for 20MHz, and 0.1 UF&47UF capacitor short-circuit for interrupting. 4. Inlet voltage stability test : the lowest voltage will be up to the highest voltage when the circuit overload. 5. Load stability test: The load is from 0% to 100%. |