Description
JY-LD6900 supports ISO11784 / 5 protocol standard, comes with CPU super decoding, readable FDX-B and EMID data format labels;
In-line installation, small size, easy to integrate into the PDA, AGV card reader and other equipment;
Distribution 62mm diameter circular antenna, and another 133mm, 210mm optional, reader speed is less than 30ms, stable performance, reliability and strong;
UART communication interface, TTL level, without understanding the complex RF communication protocol, simple operation;
Can provide interface description and development documentation;
Technical Parameters
working frequency |
134.2KHZ, 125KHZ |
Supported protocols |
ISO 11784/5 |
Read distance |
> 20 cm |
Way of working |
FDX-B (full-duplex communication) |
Read card chip |
Soft decoding |
Work power consumption |
1 W |
Read rate |
2 m -3 m / s |
Wiring |
2.54 in-line |
Operating Voltage |
5V |
Communication Interface |
UART |
Baud rate |
9600 bps |
Standard sizes |
43.43mm * 34.65mm * 2mm |
Operating temperature |
-20 ° C to + 70 ° C |
environment humidity |
5% to 95% |
Pin |
symbol |
Features |
1 |
VCC |
Power input pin:5V |
2 |
GND |
Power ground |
3 |
CK |
Floating |
4 |
CD |
Floating |
5 |
PWEN |
Module enable pin: active high |
6 |
TX |
Data transmit pin |
7 |
RX |
Data receive pin |
9 |
LED1 |
ledOutput pin: Normally high, read the label output low |
A1 |
ANT |
Antenna pin |
A2 |
ANT |
Antenna pin |
Note:UARTThe default baud rate is9600bit / s