110V 220V Long Distance Wireless High Power Lighting Motor Remote Control Controller Module Remote Control Switch

Scope of application: 220V household electric power, electric appliances with power less than 3000 watts can control its power supply and power failure, such as: water pump, mud pump, motor, lamp, fan, fan, insecticide, spray machine, car washing machine, Electric bells...etc.

Features:

1. Long-distance: It adopts imported UHF three-level signal amplification launching tube, which is farther away from the 3,000-meter remote control on the market. 4000 meters is the theoretical distance. The general open-air remote control distance is between 1000m and 3000m (environment Different, the distance is also different, the actual use depends on the size of the environmental interference), and the distance will be shortened in the case of obstacles.

2. Switching power supply step-down circuit: using the switching power supply chip LNK304 produced by American POWER Company to control the power supply, quality assurance, stability and durability.

3. Wide voltage: Suitable for voltage between AC85V-260V, ensuring long-term stable operation in circuits with different voltage environments.

4. High power: 30A relay is used to ensure long-term stable control of high-power electrical appliances.
It does not need AC contactor, and directly controls the water pump, motor, lamp, car washing machine, etc. in 3000W.

5. High sensitivity: The signal receiving adopts the real super-heterodyne RXB8 module, the sensitivity is -114dBm, the sensitivity and anti-interference ability are far beyond the supermarket super-regeneration and the ordinary super-heterodyne module, the remote control distance is farther and more stable.

6. Learning type code: You can learn the code with the same frequency remote control at will. (Don't worry if you lose the remote control during use. Just buy a remote control and learn it. It's OK, no need to replace it, which greatly saves the user's cost. ).

7. The operation is simpler: the remote control has 2 buttons, one button is on, and one button is off, which is convenient and easy to use.

8. Do not interfere with each other: digital coding is used, and there is no mutual control phenomenon between the same model products of neighbors. (ie: multiple sets of the same model can be used in the same environment without mutual control.)

This price includes: 1piece receiver (with housing) + 1piece 2-button remote control

Basic parameters
Product model: KGS-A101-1
Rated voltage: 85V-260VAC
Rated power:
Operating frequency: 315MHz
Receive sensitivity: >-114dBm
Coding type: learning remote control
Size: 93*40*15mm
Receiver size: 123*61*30.5mm
Working mode: interlock, self-locking, jog (can adjust the factory default interlock, one button is on, the other button is off)
The above dimensions are measured by hand and there may be errors, whichever is the real thing!
Remote control distance: 1000 meters, this distance is the theoretical distance without interference, and the actual living environment will be reduced according to the interference degree of the same environment and the partition wall (obstacle). The general open space environment is about 10%-50% of the nominal distance, and the remote control distance of each environment is different, depending on the size of the environmental interference.

Working mode can be switched freely*
It has been set up before shipment from the factory, and users do not need to set it without demand!
Working style introduction
(1) Interlock: In the case of two buttons of the remote control, one button is turned on and the other button is called an interlock. When multiple remote controllers control multiple receivers (such as one drag), press the corresponding remote control button, the corresponding receiver is turned on, other receivers are disconnected, and multiple receivers are locked to each other, called For interlocking.
(2) Self-locking: Control with one button, press once to open, then press again to turn off, called self-locking.
(3) Jog: Use one button to control, press and hold the remote control button to not let the relay pull in, release the remote control button and the relay is disconnected, which is called jog.

Switching power supply chip step-down advantages
1. Wide voltage and wide range of use: The voltage between 85V and 260VAC can work normally. Some regions in China have low or high voltage (220VAC±10%) and 110VAC overseas.
2. Stable, durable, low power consumption: standby power consumption is less than 0.5W, which is better than products with more than 1W resistance and voltage drop.

the theoretical control power is 6600w, considering that the load starting current is too large and in order to extend the service life of the product, we suggest that the control power should not exceed 3000w

Remote control and receiver learning pairing advantages
1. A receiver can match up to 60 remote controls for simultaneous use.
2. Assuming that the remote control is lost during use, it can also be equipped with a remote control, saving costs without a complete replacement.
3, can match most of the 315MHz remote control on the market (chips 1527, 2262, 2260, etc.)

Note: It has been set before shipment from the factory, the user does not need to set it up, and the cable is directly used after receiving the goods!

Regular learning code/clearing method

 Learning method: the indicator light will be on for 3 seconds after the receiver is powered on, short press after extinguishing Once the learning button of the receiver is on, the indicator light is always on. Pressing the button of the remote control immediately will turn off immediately, and the learning is successful.

Clearing method: the indicator will light up for 3 seconds after the receiver is powered on, and press and hold the receiver after it is turned off. The button does not turn on the indicator light, after 8 seconds, the indicator light flashes 3 times and then goes off, clearing code is successful.

The following is a method in which one multi-key remote control controls multiple receivers to set one-button full-on and full-off.
Total open learning method: After the receiver is powered on, the indicator light will be on. Immediately press the learning button of the receiver twice in a short time. After the indicator light flashes 2 times, press the learning button again, the indicator light will be on. Press the remote control once. The corresponding button indicator will go out immediately and the learning will succeed.
Total off learning method: After the receiver is powered on, the indicator light will be on. Immediately press the learning button of the receiver once. After the indicator light is off, it will light up again. After the indicator light is off, press the learning button again, the indicator light will be on. Press this time. Once the corresponding button of the remote control is pressed, the indicator light will be extinguished immediately and the learning will succeed.