11 Pins Digital Counter LED Display DH48J-A Counter Relay for Remote Control Automatic Control System

Specification:
Model:DH48J-11A
Input voltage: AC: 110V, 220V, 380V  DC: 12V, 24V
Current: 5A
Power consumption: 3W
Counting range: 1-999900
Coil power supply: 12VDC
Contact switching voltage: 220VAC
Rated frequency: 50/60Hz
Ambient temperature: -10~50
Dimensions: 117*51*59mm / 4.6*2.0*2.3in
Package weight: Approx. 240g/8.4oz

Package list:
1 * Digital Counter Relay
Use description

1. Preset multiple first, then press reset button, or disconnect the power more than 0.5 seconds then turn on the power, so that complete preset. (If the multiple is x10, it means input 10 input signal, display digital increase 1).

2. In a strong current environment, if the reset and signal wires are long, please use a shielded wire.

3. DH48J-11A, DH48JA 12V DC power output can be used for sensor supply, current is < 30mA.

4. When the DH48J-11A's ⑥ and ⑦ terminals switch on, it mean not keep memory, otherwise mean keep.

5. When the count reaches to preset number, the relay contact transposition, stop counting.

6. It is forbidden to add external voltage to reset, counting and memory terminals. 7. Can be customzied.
Note:
1. Due to the difference between monitors and light effects, the pictures may not reflect the actual color of the item.
2. Please allow slight error due to manual measurement. Thanks for your understanding.