Transmission Converter

Overviewof Characteristic MIPSMCU with 4MB Flash and 8MB SRAM. Run on eCos SupportTCP/IP/Telnet /Modbus TCPProtocol SupportRS232/RS422/RS485 to Ethernet/Wi-Fi Conversion, Serial Speed Upto 460800 bps SupportSTA/AP/AP+STA Mode SupportRouter or Bridge...

Overview of Characteristic: ² Support Four Frequency Bands, Global Standard(850/900/1800/1900MHz)² Support GSM/GPRS (No 3G Network) and 2G/3G/4G CMCC or CUCC SIM Card² Support Max 3 channel TCP/UDP.² Support Multiple Work...

ZK033A HUB, support Linux raspberry pie (Debian version) system. The market is flooded with the power of the USB HUB, but only with isolation, to prevent the reverse current, will not reverse the power supply of HUB is less and less! Netlon ZK033A...

- Color: Black- Model: ZE552A- Chipset: IC FT4232- Standard: USB 2.0 and compatible with USB 1.1- Supports RS232 serial interface DB9- Transmission rate up to 1Mbps- Plug & Play- Supports remote wake-up mode and power management - Supports Windows...

This product supports full speed devices, but does not support pure high speed devices (USB2.0). Most USB devices are down compatible and can be used. This product uses a proprietary iCoupler based technology of ADI company, is the industry's first...

Read Out & diplay:Read all the serial data and display at the location of cursor position in the input-able area. Simulation the key:Send the data through the serial port to simulate the keyboard operation.(Protocol table) Product features: the...

Digital fiber input: TOSlink square x 1Digital fiber output: TOSlink square x 3Body color: silver body + blue knob and printingBody size: approx. 144 mm x 118 mm x 34 mmBody weight: about 102 gramsPower: No power supply required

Product Features: L 1-way optical fiber signal input 3-way optical signal output L Support audio format LPCM2.0 / DTS / DOLBY-AC3 L support signal timing re-engineering Use line loss less than 0.2dB / m line, The output distance of up to 40m L...

Embedded Wiegand module, small and easy to embed other devices As a Wiegand protocol input or output interface, Default support WG26 / 34, TTL interface hexadecimal (HEX) bidirectional input and output, Communication parameters: 9600/115200, n,...

    The receiving end will display whatever data is sent through the serial port of this module. Cannot be used for programming. If you need a programming version, please click here       This product is commonly used for...

Wiegand wg26 / 34 Go To RS485 Converter Bidirectional transmission Wigan / Wigan to 485 converter , Wigan / Wigan 26, 34 automatic identification , Wigan / Wigan 485 two-way automatic conversion, no need to set . Converter with high interference MCU...

Overview of Characteristic ²  MIPS MCU with 2MB Flash and 128KB SRAM ²  Use FreeRTOS Operation System ²  Support...