13.56MHz RFID Card Reader Writer ISO14443A B ISO15693 RS232 DB9 Compatible With Felica iCode Chip

Serial number recognition for contactless cards with full protocol support

The card senses and leaves the active send data once, easy to grasp the status of the card,Support setting address(Configurable))

Fast response to serial port commands, response time within 10MS

Support one-time reading of one-sector, or continuous reading of multiple blocks of data ISO15693 protocol card, you can read the data in the entire card at one time

It can be configured as a swipe card to actively output a block or a sector of data

It can read and write data of 15693 cards, M1 cards, and NTAG21X at the same time

Communication baud rate: Default: 9600bit/s, 8 N 1 setting.

Features

Radio Frequency Identity (RFID)
• Comply with ISO15693, ISO14443A,ISO14443B,
• Compatible With Tag-It HF

• Compatible With Felica(read UID)
• Compatible With I. CODE SLI and other Chips in line with the ISO15693 Protocol
• Support Reading and Writing
• Support the Secondary Development

Data
communication frame structure

Each
frame data is as follows:

The 1s
byte STX: start character,0x20;

The 2s
byte ADDR: Address, default:0x00;

The
3s byte CMD: Command – sent by the host computer IC Card module;

The 4s
byte Length: The length of valid data for this frame.First byte start, last
byte 3 End of a byte, is a valid byte.

The 5s
byte DATA to  reciprocal 3 Bytes: Valid data.

Reciprocal
2 byte BCC: checksum;

Reciprocal
1s byte ETX: end character, 0x03;

Sample:20 00 00 08 E0 04 01 53 02 A1 CF 8F A2 03 

Card UID：E0 04 01 53 02 A1 CF 8F