RFID EM/ID Embedded Door Access Control RFID Proximity Door Access Control System Building intercom module

(No reviews yet) Write a Review

SKU:: G0II-SMKN-RAAC
UPC:
MPN:: AC-203
Weight:: 0.10 KGS

US $14.00

Current Stock:

Quantity:

Description

Description

Product Description

Specifications:

.With master cards:adding cards and deleting card

.With infrared remote control:adding or deleting card by card chip ID after lostcard

.Working Frequency:125KHz

.Power Supply: DC 9~18V

.Current: 60mA~80mA

.Rated Power: ≤ 1W

.Read Range: 5~10cm

.Card Capacity: 2000

.Temperature: <60 degree

.Humidity: 10% ~ 95% R.H

.Size: 86*34*12mm

.Outdoor Button: 1

.Sensor Input: 1

.Electric Lock Output: 1

.Application Field: building intercom,Lift

Set the card (initialization programming password)
Step 1: power off, connect S1 jumper cap 2, 3, side, back to electricity, three nights after the green light flash, the programming code
Back to the factory value (123456).
Step 2: brush two consecutive blank card (the first one to increase the card, the second delete card), the red light flashing, continuous short at this time.
Step 3: power off, reconnect the jumper cap 1, 2, and finally to electricity, card increase.

Add or Del users
Add user: in standby mode, brush "add card", then brush to add user card in a row, then brush "add card" to exit
Delete users: in standby mode, brush "Del card", then brush to remove user card in a row, then brush "Del card" to exit
Delete all user: in standby mode, brush "Del card", then brush "add card", then brush "Del card" to exit.

View AllClose