Raspberry Pi 2.15 inch e-Paper HAT+ (G) E-Ink Red/Yellow/Black/White 296×160 Screen Display For Arduino /STM32

Option: No or With Driver Board
Version Options

2.15″ E-Paper (G)

Low Power, Wide Viewing Angle, Paper-Like Effect Without Electricity
Ideal for price tags, shelf labels, industrial instruments…

Note: the driver board is optional, please refer to the Package Content for detailed part list

Features At A Glance

• No backlight, keeps displaying last content for a long time even when power down

• Ultra low power consumption, basically power is only required for refreshing

• Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi / Jetson Nano / RDK X3 / Arduino / STM32)

• Optional for e-Paper driver board:
  

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano, RDK X3

  • Adopts Raspberry Pi HAT+ standard to improve interoperability, helping the users to design and develop faster, easy to use with other peripherals and extend more functions for Raspberry Pi

  • Adapting SPI interface for connecting with controller boards like Raspberry Pi / Arduino / STM32, etc.

  • Onboard voltage translator, compatible with 3.3V / 5V MCUs

Specifications

OPERATING VOLTAGE	Raw display: 3.3V	DISPLAY COLOR	Red/Yellow/Black/White
	with driver board: 3.3V/5V
INTERFACE	3-wire SPI, 4-wire SPI	GREY SCALE	2
OUTLINE DIMENSIONS	Raw display: 60.8 × 31.8 × 1.00 (mm)	FULL REFRESH TIME	20s
	with driver board: 65 × 34 (mm)
DISPLAY SIZE	48.10 × 26 (mm)	REFRESH POWER	<50mW
DOT PITCH	0.1625 × 0.1625 (mm)	STANDBY CURRENT	<0.01uA (almost none)
RESOLUTION	296 × 160 pixels	VIEWING ANGLE	>170°

Advantages Of EINK
E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

Standard Raspberry Pi 40PIN GPIO Header
Compatible With Raspberry Pi Series Boards, Jetson Nano, RDK X3

* for reference only, the Raspberry Pi in the picture is NOT included.

Optional For E-Paper Driver Board

Onboard SPI Control Interface, For Use With Controller Boards Like Raspberry Pi / Arduino / STM32

VCC	Power (3.3V / 5V input)
GND	Ground
DIN	SPI MOSI pin
CLK	SPI SCK pin
CS	SPI chip selection, low active
DC	Data/Command selection (high for data, low for command)
RST	External reset, low active
BUSY	Busy status output pin

Onboard Voltage Translator

Compatible With 3.3V / 5V MCUs

Application Examples
Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags…


Outline Dimensions

2.15inch e-Paper (G)

2.15inch e-Paper HAT+ (G)

[] 2.15inch e-Paper (G) （No PCB Driver Board）

[] 2.15inch e-Paper HAT+ (G) （With PCB Driver Board）