125KHZ RFID embedded entrance access control system main board /Building intercom access board +10cards

(No reviews yet) Write a Review
SKU:
IRSJ-TVMU-1ZF7
Weight:
0.10 KGS
US $25.00

Description

Introduction:

1. High-speed processor and memory, ATMEL, card capacity of 2000.
2. The built-in watch-dog function and never crashed.
3. Support the infrared remote control keyboard management
4. Support the mother card management functions
5. Working voltage: DC9-14 v
6. The work frequency of 125 KHZ.
 
 
Directions for use
1. Enter the programming: press 0000+#,then led flash, after all of the following operations must be entered into a state of programming.
   Exit programming:press **
2. Modify the administrative password:press *5+New password+#(4-8bit)
3. Add user card (card read) :press * 123# read RFID card# if successful, buzzer of 1 di; and if it fails,buzzer of 3 di.
   Card number:press * 123# 10bit number of card # if successful, buzzer of 1 di; and if it fails,buzzer of 3 di.
4. Delete the user card (reading card) :press *234# read RFID card.
   Card number:press *2  10bit number of card #
Delete all:press *27474#
5. The system initialization operation:
Short-circuit S1 with metal pins, turn on the juice and buzzer 10 after shedding 3, 0000, programming code at this time restore factory Settings and other Settings are restored, but does not delete user card effectively.
htb16f1vnxxxxxxjxvxxq6xxfxxxx.jpg
View AllClose

Related Products